- Maximum permissible tensile load of conductor: 15N/mm2.
- Resistance to torsion test at normal temperature: 30℃10000 Cycles.
- Resistance to torsion test at low temperature: -40℃ 2000 Cycles
- Oil resistant
- Ozone resistant
- UV resistant
- Resistance to damp and heat
- Salt mist resistant
- Flame-retardant (IEC60332-1)
Torsion Resistant Wind Power Cable Up To 26/35kV
Type FDEH, FDEHP
Rated Voltage(Uo/U): 26/35kV
Rated Voltage(Uo/U): 26/35kV
APPLICATION:
These cables are used to transmit the power energy from the wind turbine generator to the transformer. Can be used in torsion resistant occasions in wind turbines.
These cables are used to transmit the power energy from the wind turbine generator to the transformer. Can be used in torsion resistant occasions in wind turbines.
STANDARD:
GB/T12706.3, IEC60228, Shangshang specifications, or other standards on request.
GB/T12706.3, IEC60228, Shangshang specifications, or other standards on request.
CONSTRUCTION:
Conductor: Tinned flexible copper wires, as per IEC60228 class 5.
Conductor screen: semi-conductive compound
Insulation: Ethylene propylene rubber (EPR)
Insulation screen: semi-conductive compound
Overall screen (optional): tinned copper wire braided(TCWB)
Sheath: neoprene rubber or similar elastomer, black or red
Conductor: Tinned flexible copper wires, as per IEC60228 class 5.
Conductor screen: semi-conductive compound
Insulation: Ethylene propylene rubber (EPR)
Insulation screen: semi-conductive compound
Overall screen (optional): tinned copper wire braided(TCWB)
Sheath: neoprene rubber or similar elastomer, black or red
RANGE OF SIZE:
3 phase cores + 3 earth cores: 3x25+3E ～ 3x120+3E
CORE IDENTIFICATION:
3C+3E: natural color, earth core: black or yellow/green
SHEATH COLOR:
Black, Red. etc.
SPECIAL FEATURES:
USAGE CHARACTERISTICS:
|
|
|
|
|
|
Max. conductor temp. in service |
Max. short circuit temp. (5s) |
Min. operating ambient temperature |
Min. bending radius |
Feedback form contact with us
