
These cables are used to transmit the power energy from the wind turbine generator to the transformer. Suitable for flexible application and especially for torsion load in the cable loop in wind turbines.
STANDARD:
GB/T 29631-2013, IEC60502-1,EN50525, IEC60245, IEC60228, Shangshang specification, or other standards on request.
CONSTRUCTION:
Type FDEF, H07RN-F, H07BN4-F, 450/750V |
|
|
|
Type FDEPJ (equivalent to H07ZZ-F), 0.6/1kV |
|
|
|
Type FDEH, FDEH-X, 0.6/1kV |
|
|
|
Number of Cores |
Nominal cross-sectional area |
1-Core |
1.5mm2~800mm2 |
2-Core |
0.5mm2~240mm2 |
3-Core |
0.5mm2~300mm2 |
4-Core |
0.5mm2~185mm2 |
5-Core |
0.5mm2~150mm2 |
6-Core to 48-Core |
0.5mm2~2.5mm2 |
1-Core: |
Brown, or Natural, or Black |
2-Core: |
Brown, Blue |
3-Core: |
Brown, Black, Grey; or yellow/green, blue, brown |
4-Core: |
Brown, Black, Grey, Blue; or Yellow/green, Brown, Black, Grey |
5-Core: |
Brown, Black, Grey, Blue, Green/Yellow |
≥ 6-Core: |
black, with white printing numbering |
Note: other color can be available on request. |
Black
SPECIAL FEATURES:
- Maximum permissible tensile load of conductor: 15N/mm2.
- Torsion resistant test at normal temperature :30℃ 10000 Cycles
- Torsion resistant test at low temperature: -40℃ 2000 Cycles
- Low smoke and Halogen Free to IEC 61034, IEC60754 for Type FDEPJ cable
- Oil resistant
- Ozone resistant
- UV resistant
- Resistance to damp and heat
- Salt mist resistant
- Flame-retardant (IEC60332-1)
|
|
|
|
Max. conductor temp. in service |
Max. short circuit temp. (5 Sec.) |
Min. operating ambient temperature |
Min. bending radius |