
Non-torsion Resistant Aluminium Alloy (8030) Conductor Wind Power Cable Up To 1.8/3kV
APPLICATION :
These cables are used to transmit the power energy for wind turbine. It can not be used for torsion resistant.
STANDARD:
GB/T 29631-2013, IEC60502-1 , Shangshang specifications, or other standards on request.
CONSTRUCTION:
Conductor: aluminium alloy (8030) , as per IEC60228 .
Insulation: Ethylene propylene rubber (EPR)
Sheath: neoprene rubber or similar elastomer compound, black
RANGE OF SIZE:
These cables are used to transmit the power energy for wind turbine. It can not be used for torsion resistant.
STANDARD:
GB/T 29631-2013, IEC60502-1 , Shangshang specifications, or other standards on request.
CONSTRUCTION:
Conductor: aluminium alloy (8030) , as per IEC60228 .
Insulation: Ethylene propylene rubber (EPR)
Sheath: neoprene rubber or similar elastomer compound, black
RANGE OF SIZE:
Number of Cores |
Nominal cross-sectional area |
1-Core |
10mm2~630mm2 |
CORE IDENTIFICATION:
1-Core: black, white, or natural, etc.
SHEATH COLOR:
Black
SPECIAL FEATURES:
1-Core: black, white, or natural, etc.
SHEATH COLOR:
Black
SPECIAL FEATURES:
- Oil resistant
- Ozone resistant
- UV resistant
- Resistance to damp and heat
- Salt mist resistant
- Flame-retardant (IEC60332-1)
USAGE CHARACTERISTICS:
|
|
|
|
Max. conductor temp. in service |
Max. short circuit temp. (5s) |
Min. operating ambient temperature |
Min. bending radius |
Feedback form contact with us