Type: FDHSUR, FDHSURP, FDHSUR84

Rated Voltage: 300/500V

  • information

APPLICATION:

These cables are used for low frequency(70KHz) weak current data and signal transmission between cabins in wind turbine and busbar connecting box in the top and base of tower tube, the cable can be used for torsion resistant occasions as well.

STANDARD:

IEC60245-1, IEC60228, Shangshang Specification

CONSTRUCTION:

Type FDHSUR

  • Conductor: bare or tinned flexible copper wires, as per IEC60228 class 5.
  • Insulation: elastomer, twisted pair
  • Separation tape
  • Sheath: polyurethane (PUR)


Type FDHSURP (equivalent to SK-TP-C-PUR )

  • Conductor: bare or tinned flexible copper wires, as per IEC60228 class 5.
  • Insulation: elastomer, twisted pair
  • Separation tape
  • Overall screen: Tinned copper wire braided (TCWB)
  • Sheath: polyurethane (PUR)


Type FDHSUR84

  • Conductor: bare or tinned flexible copper wires, as per IEC60228 class 5.
  • Insulation: elastomer, twisted pair
  • Separation tape
  • Innersheath: elastomer
  • Overall screen: Tinned copper wire braided (TCWB)
  • Sheath: polyurethane (PUR)
RANGE OF SIZE:

No. of pairs

Nominal cross section area

1~37

0.34 mm2 ~ 1.5mm2

USAGE CHARACTERISTIC:
  • Maximum permissible tensile load of conductor: 15N/mm2.
  • Resistance to torsion test at normal temperature :30℃10000 cycles
  • Resistance to torsion test at low temperature: -40℃ 3000 cycles
  • Oil resistant
  • Ozone resistant
  • UV resistant
  • Resistance to damp and heat
  • Salt mist resistant







Max. conductor temp. in service
90℃

Min. operating ambient temperature
-40℃

Min. bending radius
6 × D

Feedback form contact with us
Product Catalog