These LSZH cross-linked polyolefin insulated flame retardant wires and cables are widely used in power lighting and internal wiring in household appliances, electric equipment, instruments and meters, control gear, electronic equipment and automatic devices for rated voltage up to 450/750V across residential, commercial and industrial environments.
They are suitable for fixed wiring and installation, indoor and outdoor, in surface mounted or embedded conduits, or similar closed systems, but they are not suitable for mobile equipment.
STANDARDS:Q/320481SS026, BS 7211, IEC60228, IEC60332-1, IEC61034, IEC60754, or other standards on request.
|
WDZ-BYJ |
Conductor: Class 1 or Class 2 annealed plain copper conductor
Insulation：low smoke halogen free(LSZH) flame retardant cross-linked polyolefin (XLPO)
|
|
WDZ-BYJR |
Conductor: Class 5 annealed plain copper conductor
Insulation：low smoke halogen free(LSZH) flame retardant cross-linked polyolefin (XLPO)
|
NUMBER OF CORES & CROSS-SECTIONAL AREA
|
Type |
Voltage |
Number of core |
Nominal CSA (mm2) |
|
WDZ*-BYJ |
300/500V |
1 |
0.5-1.0 |
|
WDZ*-BYJ |
450/750V |
1 |
1.5～400 |
|
WDZ*-BYJR |
300/500V |
1 |
0.5-1.0 |
|
WDZ*-BYJR |
450/750V |
1 |
1.5～240 |
*Flame retardant：Acc. to IEC60332-3-22(Cat.C), IEC60332-3-23(Cat.C), IEC60332-3-24(Cat.C)
Single core: no preferred color.
Voltage: 300/500V, 450/750V
Maximum continuous operating temperature of conductor: 90℃
Maximum short circuit temperature(maximum duration.5s): 250℃
Minimum environment temperature for installation: 0℃
Minimum bending radius of cable: 4×O.D. (for O.D. ≤25mm), 6×O.D.(for O.D. ≥25mm).
OPTIONAL CHARACTERISTICS ON REQUEST:
Fire resistant: Acc.to IEC60331 and/or BS6387 (Mica tape is added over conductor)
Flame retardant: Acc. to IEC60332-3-24(Cat.C), IEC60332-3-23(Cat.B), IEC60332-3-22(Cat.A)
Anti-termite
UV resistant
Mineral oil resistant
Low temperature use.
