This rubber sheathed shuttle car cable is suitable for the power connection of shuttle cars, bolters(anchor machine)or similar equipment in coal mine.
STANDARDS:
Q/320481SS431-2014, MT 818-2009.
Conductor: flexible tinned copper conductor (class 5)
Insulation：ethylene-propylene rubber (EPR)
Insulation screen: semi-conducting layer
Metallic screen: composite screen with fine tinned copper wires and polyester yarn braid.
Core arrangement: three phase cores plus one auxiliary core
Reinforcement：open polyester yarn braid layer
Outer sheath: Chlorinated Polyethylene(CPE)
|
Number of cores |
Conductor CSA (mm2) |
|
3+1 |
16 ∽ 35 |
Three power cores: by colored polyester yarn of red, white, blue over insulation.
Black (0.38/0.66kV,1.9/3.3kV)
Yellow (0.66/1.44kV)
USAGE CHARACTERISTICS:
Rated voltage: 0.38/0.66kV, 0.66/1.14kV, 1.9/3.3kV
Maximum continuous conductor operating temperature: 75℃
Maximum conductor short circuit temperature: 160℃ (maximum duration 5Sec.)
Minimum installation ambient temperature: 0℃
Minimum bending radius for installation: 6xO.D.
CERTIFICATION:
MA certification
