- Rated voltage：0.6/1kV, 1.8/3kV, 3.6/6kV, 6/10kV, 8.7/15kV, 12/20kV
- Maximum continuous conductor temperature at normal operation：90℃
- Maximum short-circuit temperature (5sec. maximum duration) ：250℃
- Minimum ambient temperature for installation: 0℃
- Operation ambient temperature scope: -15℃～+60℃
- Maximum moving speed of cable: < 30m per minute
- Minimum bending radius of cable: 12 x OD
- Ozone resistant, oil resistant, UV resistant moisture resistant
Ship To Shore Connection Cable
Low voltage: 0.6/1kV, 1.8/3kV
Medium voltage: 3.6/6kV，6/10kV, 8.7/15kV, 12/20kV
Medium voltage: 3.6/6kV，6/10kV, 8.7/15kV, 12/20kV
APPLICATION:
The product is suitable for marine shore power systems, low-speed mobile port machinery such as cranes, container cranes, etc., and can also be used to provide power for other types of mobile equipment, such as open-cast operations and underground mining.
STANDARD:
Q/320481SS602, IEC60092-360, and other standards on request
TYPICAL CONSTRUCTION—LV Cable without optical fiber:
1.Conductor: fine tinned copper wires
2.Insulation: polyethylene-propylene rubber(EPR)
3.Core arrangement: three phase core design plus two earth core and one control core split into 3 parts positioned in the interspace.
4.Inner sheath: special rubber compound
5.Reinforced layer: open polyester weaves braid
6.Outer sheath: special rubber compound
TYPICAL CONSTRUCTION—LV Cable with optical fiber:
1.Conductor: fine tinned copper wires
2.Insulation: polyethylene-propylene rubber(EPR)
3.Core arrangement: three phase core design plus 1 earth core and one control core and I optical fiber core split into 3 parts positioned in the interspace.
4.Inner sheath: special rubber compound
5.Reinforced layer: open polyester weaves braid
6.Outer sheath: special rubber compound
TYPICAL CONSTRUCTION—MV Cable without optical fiber:
1.Conductor: fine tinned copper wires
2.Conductor screen: semi-conducting layer
3.Insulation: polyethylene-propylene rubber(EPR)
4.Insulation screen: semi-conducting layer
5.Core arrangement: three phase core design plus two earth core and one control core split into 3 parts positioned in the interspace.
6.Inner sheath: special rubber compound
7.Reinforced layer: open polyester weaves braid
8.Outer sheath: special rubber compound
TYPICAL CONSTRUCTION—MV Cable with optical fiber:
1.Conductor: fine tinned copper wires
2.Conductor screen: semi-conducting layer
3.Insulation: polyethylene-propylene rubber(EPR)
4.Insulation screen: semi-conducting layer
5.Core arrangement: three phase core design plus 1 earth core and one control core and I optical fiber core split into 3 parts positioned in the interspace.
6.Inner sheath: special rubber compound
7.Reinforced layer: open polyester weaves braid
8.Outer sheath: special rubber compound
RANGE OF CABLE SIZES:
Phase core: 3x25mm2 to 3x240mm2
Control core: to be adviced
Optical fibre: to be adviced
SHEATH COLOR:
Black, or as the customer’s requirement
USAGE CHARACTERISTICS:
The product is suitable for marine shore power systems, low-speed mobile port machinery such as cranes, container cranes, etc., and can also be used to provide power for other types of mobile equipment, such as open-cast operations and underground mining.
STANDARD:
Q/320481SS602, IEC60092-360, and other standards on request
TYPICAL CONSTRUCTION—LV Cable without optical fiber:
1.Conductor: fine tinned copper wires
2.Insulation: polyethylene-propylene rubber(EPR)
3.Core arrangement: three phase core design plus two earth core and one control core split into 3 parts positioned in the interspace.
4.Inner sheath: special rubber compound
5.Reinforced layer: open polyester weaves braid
6.Outer sheath: special rubber compound
TYPICAL CONSTRUCTION—LV Cable with optical fiber:
1.Conductor: fine tinned copper wires
2.Insulation: polyethylene-propylene rubber(EPR)
3.Core arrangement: three phase core design plus 1 earth core and one control core and I optical fiber core split into 3 parts positioned in the interspace.
4.Inner sheath: special rubber compound
5.Reinforced layer: open polyester weaves braid
6.Outer sheath: special rubber compound
TYPICAL CONSTRUCTION—MV Cable without optical fiber:
1.Conductor: fine tinned copper wires
2.Conductor screen: semi-conducting layer
3.Insulation: polyethylene-propylene rubber(EPR)
4.Insulation screen: semi-conducting layer
5.Core arrangement: three phase core design plus two earth core and one control core split into 3 parts positioned in the interspace.
6.Inner sheath: special rubber compound
7.Reinforced layer: open polyester weaves braid
8.Outer sheath: special rubber compound
TYPICAL CONSTRUCTION—MV Cable with optical fiber:
1.Conductor: fine tinned copper wires
2.Conductor screen: semi-conducting layer
3.Insulation: polyethylene-propylene rubber(EPR)
4.Insulation screen: semi-conducting layer
5.Core arrangement: three phase core design plus 1 earth core and one control core and I optical fiber core split into 3 parts positioned in the interspace.
6.Inner sheath: special rubber compound
7.Reinforced layer: open polyester weaves braid
8.Outer sheath: special rubber compound
RANGE OF CABLE SIZES:
Phase core: 3x25mm2 to 3x240mm2
Control core: to be adviced
Optical fibre: to be adviced
SHEATH COLOR:
Black, or as the customer’s requirement
USAGE CHARACTERISTICS:
Feedback form contact with us
